Loading ...
Loading ...
Loading ...
DJI RSC 2
User Manual
© 2020 DJI OSMO All Rights Reserved.
25
Motor Parameters
Auto Tune: the stiffness value is determined by the payload of the gimbal. Use Auto Tune
to obtain the stiffness value automatically after balancing.
Tap Auto Tune and DJI RSC 2 automatically calculates the result based on the weight of
the gimbal setup. Alternatively, press and hold the M button and trigger simultaneously
for four seconds to start auto tune without using the app.
The auto tune process takes approximately 15 to 30 seconds. After auto tune, you can see
detailed motor diagnostics at the bottom of the screen. If the gimbal is properly balanced,
the power value of the motors should be in the range of ±5. If power consumption on a
particular axis constantly goes beyond that range, check the mechanical balance of DJI
RSC 2.
Stiffness: the motor stiffness adjustment allows you to ne-tune the power that is applied
by the motors as they react and balance the weight on each axis. Make sure you leave
an extra margin to ensure stability at all times. If the stiffness value is too high the gimbal
may shake and if the value is too low the gimbal performance will be affected.
When using auto tune, make sure the three axes are unlocked, and that DJI
RSC 2 is placed on a steady surface in Upright or Underslung mode.
Make sure the gimbal is balanced and the stiffness values are tuned properly
every time you change the camera or lens.
Loading ...
Loading ...
Loading ...