Loading ...
Loading ...
Loading ...
Pairing with the receiver
Assign your Alert Sensor to one of the 3 channels (each
with distinct audible sound) available on the Indoor Alarm
Receiver.
1. Place the Alert Sensor faced down to avoid triggering it.
2. Decide which channel (1, 2 or 3)
you want to assign your sensor to,
and then press and hold the desired
Channel button on the back of the
Indoor Alarm Receiver until the LED
indicator for that channel lights up.
3. Within 10 seconds, trigger the Alert Sensor by lifting it up.
The Indoor Alarm Receiver sounds the channel alarm and
flashes the channel LED to confirm successful pairing.
Mounting the Alert Sensor
The Alert Sensor can be deployed outdoors (it's
weatherproof!), for example near the entry to your driveway
or garage, or simply mount it indoors near a likely access
point such as the front door/entrance to your home or
business.
For more useful installation tips, see "Placement guide" on
page 7.
1. Attach the mounting bracket for the Alert Sensor to a
wall using the supplied screws. You may need to use wall
plugs depending on the surface.
2. Fit the tab on the mounting bracket into the groove on
the back of the Alert Sensor. Slide the Alert Sensor down
until it locks into place.
3. Adjust the angle of the Alert Sensor accordingly.
Loading ...
Loading ...
Loading ...