Loading ...
Loading ...
Loading ...
20
EN
– While activated, the product uses the temperature sensor of the
remote control to measure the room temperature.
– The remote control transmits the measured temperature in 3-minute
intervals to the main unit.
– This allows to set the target temperature for a specific location in the
room.
NOTICE
When the main unit does not receive any signal from the
remote control for 7 minutes, it switches off the follow me function.
As soon as the temperature signal is being received, the main unit
automatically switches on the follow me function.
Clock
The remote control is equipped with a clock. The time is shown on the
left side of the display (X).
• Press the clock button (23) for 3 seconds. The clock starts to
flash.
• Set the time with the decrease (2) and increase (16) buttons. Press
and hold the button to change the time quicker.
• Press the clock button (23) to confirm the setting.
°F/°C
Press and hold both the decrease (2) and the increase (16) button
for 3 seconds to toggle the temperature units between Fahrenheit and
Celsius.
NOTICE
When the main unit does not receive any signal from the
remote control for 7 minutes, it switches off the follow me function.
As soon as the temperature signal is being received, the main unit
automatically switches on the follow me function.
Child lock
NOTICE
The child lock is only available for the remote control. The
control panel (P) is always active.
• To activate/deactivate the child lock, press the lock button (21),
e.g. with a toothpick.
• When the child lock is activated:
– is shown on the right side of the remote control display (X).
– All buttons of the remote control are locked.
Loading ...
Loading ...
Loading ...