Loading ...
Loading ...
Loading ...
15
Hotline: 1-866-902-9690
OPERATION
Slope Gauge
(TOO STEEP)
15
O
Slope
15
O
Slope
(OK)
Fig. 8
Fig. 9
15
o
dashed line
USE THIS SLOPE GAUGE TO DETERMINE
IF A SLOPE IS TOO STEEP FOR SAFE OPERATION!
To check the slop, proceed as follows:
1. Remove this page and fold along the dashed line.
2. Locate a vertical object on or behind the slope (e.g. a pole, building, fence, tree, etc.)
3. Align either side of the slope gauge with the object (See Fig 8 and Fig 9).
4. Adjust gauge up or down until the left corner touches the slope(See Fig 8 and Fig 9).
5. If there is a gap below the gauge, the slope is too steep for safe operation(See Fig 9 above).
WARNING: Slope are a major factor related to slip and fall accidents which can result in severe injury or death. Do not operate machine
on slops in excess of 15 degrees. All slopes require extra caution.
Always trim across the face of slops, never up and down slopes.
Loading ...
Loading ...
Loading ...