Loading ...
Loading ...
Loading ...
4
Installation Instructions
STEP 11:
Install Intake and Exhaust Hose Adapters to Dual Hose
Window Panel.
STEP 7:
Assemble Intake Hose Assembly and Mount to back of
Unit.
STEP 8:
Extend the intake hose approximately 4” from each end.
Screw the adapters onto the ends of the hose, turning
clockwise until they are secure. Insert the round adapter
into the intake vent on the baffle you assembled onto the
AC in the previous step and turn counter-clockwise to
secure it.
STEP 9:
If you have not installed your Portable AC yet, please
follow the instructions to assemble the 2 adapters
onto the exhaust hose to make up the exhaust hose
assembly (step 2 of the installation instructions). Slide
the fabric insulation over the hose, then assemble the
hose assembly onto the back of the Air Conditioner.
STEP 10:
STEP 12: Install Exhaust Nozzle to Main
Window Panel
1. Hold the main
window panel so
that the L-shaped
edges of the panel
are facing you.
2. Align the exhaust
nozzle with the slots in the
opening, and then insert
and slide the nozzle to
access the hole from the
back of the main window
panel.
3. Turn the main window
panel over, so that the
nozzle is away from you.
Insert a flat tip screw
through the hole to
fasten the window panel
to the adapter.
STEP 13:
Complete the installation by continuing from Step 4 on
page 13 of your Use & Care manual.
Printed in the United States
Units are recommended to operate at conditions of 104 F Outdoor and 80 F indoor and below.
Loading ...
Loading ...
Loading ...