Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
56
Maintenance
10.
Install a new sealing washer onto the
drain bolts. Tighten the drain bolts.
11.
Fill the oil tank with the recommended
oi
l. (2 P. 41)
uTo fill the oil tank to the upper level,
oil should be add two steps.
12.
Pour the recommended oil into the oil
tank, up to the UPPER level mark.
13.
Install the oil fill cap/dipstick securely.
14.
Start the engine. Let it idle 5 minutes.
During idling, support your motorcycle in
an upright position on a firm, level
surface to assure an accurate oil level
reading.
15.
Stop the engine. Remove the oil fill cap/
dipstick.
16.
Add the recommended oil up to the
UPPER level mark. (Do not overfill.)
17.
Reinstall the oil fill cap/dipstick.
Crankcase
Torque: 18 lbf·ft (25 N·m, 2.5 kgf·m).
Down tube
Torque: 29 lbf·ft (39 N·m, 4.0 kgf·m).
Required oil
When changing oil & engine oil
filter:
2.06 US qt (1.95 liters)
When changing oil only:
2.0 US qt (1.9 liters)
NOTICE
Improper installation of the oil filter can result in serious
damage to the engine.
Loading ...
Loading ...
Loading ...