Loading ...
Loading ...
Loading ...
26
Operation Guide
Fuel fill cap removal and
installation for 50 STATE (meets
California)
5
0 STATE versions of this motorcycle are
equipped
with an evaporative emission
c
ontrol system. (P101)
For the system to function properly, observe
the following when removing and installing
the fuel fill cap.
!a To open the fuel fill cap, turn the cap
counterclockwise.
uDo not disconnect the breather tube.
Allow markBreather tube
Fuel fill cap
!b To close the cap, align the tabs of the fuel fill
cap to the slots of the filler neck with the
arrow mark on the cap towards the rear of
the motorcycle.
!c Turn the cap clockwise until the arrow mark
points towards the front.
u Make sure that the breather tube is not
twisted or blocked when the cap is secure
in place.
NOTICE
If you replace the fuel fill cap, use only a Honda Genuine
replacement parts or its equivalent. Failure to use the
proper part could cause serious fuel system problem.
Loading ...
Loading ...
Loading ...