Loading ...
Loading ...
Firmware Update for YSP-2700
6. When “Success!” is shown in the front panel display, press the key on the
unit’s top panel.
The firmware update is complete.
NOTE:
*If the firmware update fails, use the POWER ( ) key to turn the unit off and then on again,
and repeat the procedure form step 1 again. If the firmware update fails again, confirm the
USB flash drive is correctly connected to the UPDATE ONLY jack.
*If any of the following messages are displayed, a problem has occurred during the update.
-“Not found”.
The USB flash drive does not contain the firmware data. Use a PC to properly save the
firmware data to the USB flash drive again.
-“XXXXSumError”.
There is a problem with the data stored on the USB flash drive. Use a PC to confirm data
on the USB flash drive.