Loading ...
Loading ...
Loading ...
3-9
E
EJU00452a
Switches
First, place the vehicle in the water to pro-
vide adequate engine cooling. Push the
starter switch
1 and start the engine, then
push the engine stop switch 2. Restart the
engine and pull the lanyard on your left wrist
to remove the lock-plate 3 from the engine
stop lanyard switch. Verify that the engine
stops immediately, when the engine stop
switch pushed or the lock-plate removed
from the engine stop lanyard switch. Be sure
the lanyard is in good condition with no
frayed or broken parts. A damaged lanyard
must be replaced; it should never be
repaired or tied together.
EJU00453a
Cooling water pilot outlet
Check that cooling water comes out from
the outlet(s) while engine is running in the
water.
EJU00454a
Multifunction meter
Check the proper operation of multifunction
meter. Refer to “MULTIFUNCTION METER”
in Chapter 2 for correct meter operation.
Loading ...
Loading ...
Loading ...