Loading ...
Loading ...
Loading ...
24_ setting up
setting up your refrigerator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
1. Pull out the freezer drawer ( 1 ), then you can see the middle hinge ( 2 ) .
2. Insert the hex wrench (4 mm) ( 3 ) into the shaft ( 4 ) of the middle hinge.
3. Please adjust the height by turning the hex wrench ( 3 ) clockwise ( ) or counter-clockwise (
).
When you turn the hex wrench counter-clockwise ( ), the door will move up.
Only the left-door height is adjustable for Swing-Type.
1. After adjusting the doors, please insert the supplied fastener ( 5 ) using Pliers ( 6 ) in the gap
between the hinge-grommet ( 7 ) and the middle hinge ( 8 ). The number of fasteners you’ll need to
insert depends on the gap.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 1.0mm.
When the left door
is lower than the
right door.
When the left door
is higher than the
right door.
Adjustment
part
Adjustment
part
2
3
4
1
3
Loading ...
Loading ...
Loading ...