Loading ...
Loading ...
Loading ...
(355,1)
北米Model "A8240BE-E" EDITED: 2019/ 2/ 18
7-20. BSD/RCTA (if equipped)
S07BM
The BSD/RCTA consists of rear radar with
Blind Spot Detection and Rear Cross
Traffic Alert.
These functions enable the system to
detect objects or vehicles to the rear,
drawing attention to the driver when
changing a lane or when driving in reverse.
WARNING
The driver is responsible for driving
safely. Always be sure to check the
surroundings when changing lanes
or reversing the vehicle.
The system is designed to assist the
driver to change lanes or reverse
safely by monitoring the rear and
side areas of the vehicle. However,
you cannot rely on this system alone
in assuring the safety during a lane
change or reversing. Overconfi-
dence in this system could result in
an accident and lead to serious
injury or death. Since the system
operation has various limitations,
the flashing or illumination of the
BSD/RCTA approach indicator light
may be delayed or it may not operate
at all even when a vehicle is present
in a neighboring lane or approach-
ing from either side.
The driver is responsible for paying
attention to the rear and side areas
of the vehicle.
& System features
S07BM01
BSD/RCTA consists of the following func-
tions.
. To detect a vehicle in a blind spot on an
adjacent lane or a vehicle approaching at
high speeds (Blind Spot Detection).
. To detect a vehicle approaching from
the right or left while reversing the vehicle
(Rear Cross Traffic Alert).
The system uses radar sensors for the
above functions.
NOTE
The BSD/RCTA radar sensor has been
certified by the radio wave related laws
of the U.S. and Canada. When driving in
other countries, certification of the
country where the vehicle is driven
must be obtained. For certification in
the U.S. and Canada, refer to “Certifica-
tion for the BSD/RCTA” FP360.
! Blind Spot Detection (BSD)
S07BM0101
1) Operating range
The system warns the driver of dangers as
follows.
. If the system detects a vehicle in the
blind spot, the BSD/RCTA approach in-
dicator light(s) on the outside mirror(s) will
illuminate.
– CONTINUED –
BSD/RCTA
353
7
Starting and operating
Loading ...
Loading ...
Loading ...