Loading ...
Loading ...
Loading ...
(252,1)
北米Model "A8240BE-E" EDITED: 2019/ 2/ 18
To adjust the reverse tilt-down mirror
angle, adjust the outside mirror using the
remote control mirror switch while the
reverse tilt-down operates. For details
about how to adjust the outside mirror
angle, refer to “Remote control mirror
switch” FP249.
Memory function:
The angle of the reverse tilt-down mirror
can be registered. Register the position
with button “1”, “2” or each of the access
key fobs and retrieve the position.
For details about registration or retrieval of
a position, refer to “Memory function
(driver’s seat – if equipped)” FP37.
NOTE
If the seat is moved forward or back-
ward 1.18 in (30 mm) or more, the
reverse tilt-down will move to the
factory default position or the last
position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward
1.18 in (30 mm) or more.
NOTE
. The factory setting (default setting)
for this function is set as “non-opera-
tional”. This setting can be changed to
“operational” at SUBARU dealers. For
more details, contact a SUBARU dealer.
. If the hold last position function
setting is “non-operation”, the reverse
tilt-down will move to the factory de-
fault position.
3-18. Defogger and deicer (if
equipped)
S03BI
1) Rear window defogger
2) Outside mirror defogger (if equipped)
3) Windshield wiper deicer (if equipped)
Defogger and deicer
250
Loading ...
Loading ...
Loading ...