Loading ...
Loading ...
Loading ...
APPENDIX
Problems Solutions
Cleaning is nished but
small dust particles come
out of the brush.
• After cleaning, operate the vacuum for 10 seconds or more to
suction up the small dust particles.
Vacuum cleaner stops
operation during cleaning.
• As this product has the overheating prevention device of the
motor, product will stop operation temporarily for the following
conditions.
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush
clogged.
– When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product
on again. (This case may differ depending on the ambient
temperature.)
Static electricity occurs
when cleaning a thick and
soft mat.
• Materials of a mat (childcare center mat, noise prevention mat
for between oors, etc.) may cause the static electricity.
– Move the brush on a normal oor for a while and clean again,
then the static electricity should disappear.
• This Vacuum cleaner is approved the following.
– The Low Voltage Directive 2014/35/EU
– The EMC Directive 2014/30/EU
English
31
VS9000_EN_00821L-03_UK_A5.indd 31 2020-12-08 오후 4:13:11
Loading ...