Loading ...
Loading ...
Loading ...
Problem solving guide
62
Message Possible cause and remedy
Clean the fluff filter.
Check the airways.
still lights up
after a
programme
cancellation
despite thorough
cleaning.
The plinth filter looks clean after thorough cleaning.
However, the programme is terminated again and the
error message appears again. There are probably still
deeper residues which could not be removed.
To switch off the message: press OK.
Check all of the possible causes described below.
The heat exchanger is clogged.
Check the heat exchanger. Follow the instructions
in "Problem solving guide - Checking the heat
exchanger".
The plinth filter is clogged on a deeper level.
Check the plinth filter. Follow the instructions in
"Problem solving guide - Replacing the plinth
filter".
If the plinth filter is not deformed or defective, you
can regenerate it in the washing machine. Follow
the instructions in "Problem solving guide -
Regenerating the plinth filter".
Empty the container
or check the drain
outlet. lights up
after a
programme has
been cancelled.
The condensed water container is full or there is a
kink in the drain hose.
Empty the condensed water container.
Check the drain hose.
To delete the fault:
Open and close the door while the dryer is
switched on or switch the dryer off and back on.
Obstruction
detected. Untangle
laundry and restart.
lights up after a
programme has
been cancelled.
The laundry is unevenly distributed or has rolled up.
Open the door and loosen the laundry. Remove a
few items, if necessary.
Switch the dryer off and then back on.
Start a programme.
Loading ...
Loading ...
Loading ...