Loading ...
Loading ...
Loading ...
Before using for the first time
24
Useful tip: To postpone set-up until
later: touch the Skip sensor. The
following message will then appear in
the display:
It is possible to set up later in "Settings" /
"Miele@home".
Confirm with OK.
via WPS via App
Which connection method do you
want to use?
Select the connection method (either
via WPS or via App) you wish to use.
You will then be guided by the display
and the Miele@home App.
Setting the clock format
The time of day can be displayed as a
24-hour or 12-hour clock.
Select the clock format you want and
confirm this with the OK sensor.
The display will change to the next
setting.
Setting the time of day
This message only appears if the
tumble dryer has not yet been
connected to a Wi-Fi network.
The time of day is set automatically if
connection is established with a Wi-Fi
network.
OK
12 00
11 59
10 58
13 01
14 02
Clock display
Place your finger on the number that
you want to change and move your
finger in the direction you want.
Confirm with the OK sensor.
Further information will appear in the
display.
Continuing setup
Refer to “1. Notes on correct laundry
care”.
You can then load the tumble dryer
and select a programme as described
in “2. Loading the tumble dryer” and
“3. Selecting a programme”.
The initial commissioning process is
completed when a programme lasting
longer than one hour has been carried
out in full.
Loading ...
Loading ...
Loading ...