Loading ...
Loading ...
Loading ...
Installation Instructions
Flexible metal appliance connector (1/2” I.D.)
A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing
a new range.
*Teflon: Registered trademark of DuPont
Long matches and/or match holder (for
models equipped with standing piiots).
Gas line shut-off valve
Pipe joint sealant or UL-approved pipe
thread tape with Teflon* that resists action
of natural and LP gases
Flare union adapter for connection to gas
supply line (3/4” or 1/2” NPT x 1/2” l.D.).
Flare union adapter for connection to
pressure regulator on range (1/2” NPT x
1/2” l.D.)
Liquid leak detector or soapy water.
Lag bolt or 1/2” O.D. sleeve anchor (for
concrete floors only).
MATERIALS YOU MAY NEED
FOR YOUR SAFETY
Do not store or use combustible materials,
gasoline or other flammable vapors and
Iiquids in the vicinity of this or any other
appliance. lf you smell gas:
Open windows.
Don’t touch electrical switches.
Extinguish any open flame.
Immediately call your gas supplier.
PhiIIips screwdriver
5/16” Nut Driver
FIat-bIade screwdriver
3/16” or smaller
Pliers
Level
Pencil and ruler
Open-end or
adjustable wrench
Pipe wrenches (2)
(one for backup)
Drill, awl or nail
PART INCLUDED
Anti-tip bracket kit
1
2
3
4
TOOLS YOU WILL NEED
22
1” = 2.5 cm.
1’ = 0.3 m.
Loading ...
Loading ...
Loading ...