Loading ...
Loading ...
Loading ...
©2016 Hestan Commercial Corporation
4
EN
DRAWER INSTALLATION (AGSR)
1. Your new Hestan cabinet drawers come pre-installed in their drawer boxes. It will be necessary to
remove them before installing the box in your island structure. Press the release lever (shown in green)
on each side of the drawer to disengage the slide (up on the left, down on the right), then pull the drawer
all the way out.
2. Consult the table at the end of this instruction manual to determine the appropriate cutout dimensions
for the drawer you are installing. The cutouts should be square at all corners for proper fitment of the
cabinet. The installer will have to build up any internal structural elements or supports in the island in
order to secure the drawer box in place. Stainless steel hardware (not included) is highly recommended.
3. Slide the drawer box into the opening and check for proper alignment. Secure the box to the structural
members of your island using the various available mounting holes inside the box. Reinstall the drawer
by aligning the slides on either side and push the drawer back into the opening. You will hear the release
levers click. Open and close the drawer a few times to check for proper function and alignment.
RELEASE
LEVER
DRAWER
BOX
Loading ...
Loading ...
Loading ...