Loading ...
Loading ...
Loading ...
45
Maintenance
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your motorcycle:
● Tire tread wear and air pressures are within
limits.
2 P. 55
● Lights, horn, and turn signals operate
normally.
● Check the condition of the drive chain.
Adjust slack and lubricate as needed.
2 P. 75
Check the following items if you are carrying a
passenger or cargo:
● Combined weight is within load limits.
2 P. 128
● Cargo is secured properly.
● Suspension spring preload is adjusted to suit
load.
2 P. 84
Check the following items after you get on your
motorcycle:
● Throttle action moves smoothly without
binding.
2 P. 82
● Brake lever and pedal operate normally.
● Check the remaining fuel and refuel when
needed.
2 P. 36
● Engine stop switch functions properly.
2 P. 32
Check the following items at regular intervals:
● Oil level is between the upper and lower
marks.
2 P. 65
● Brake fluid level is
Front: above the LWR mark.
Rear: between the UPPER and LOWER level
marks.
2 P. 72
● Engine coolant level is between the UPPER
and LOWER level marks.
2 P. 70
● Side stand function properly. 2 P. 74
Pre-ride Inspection
13 CB500F-31MGZA000.book 45 ページ 2012年11月27日 火曜日 午後12時46分
Loading ...
Loading ...
Loading ...