Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
98
Troubleshooting
2.
Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
3.
Adjust the drive chain. 2 P. 76
4.
Tighten the rear axle nut.
5.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
6.
After installing the wheel, apply the brake
pedal several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Brake caliper bracket
Lug
Swingarm
Slot
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m).
Torque: 15 lbf·ft (21 N·m, 2.1 kgf·m).
13 CB500F-31MGZA000.book 98 ページ ２０１２年１１月２７日 火曜日 午後１２時４６分
Loading ...
Loading ...
Loading ...