Loading ...
Loading ...
Loading ...
56
MAINTENANCE
WARNING
• For safety reasons, do not allow children or
animals to enter the appliance. It may cause
damage or injury.
Using Condenser Clean Feature
The appliance washes lint, which builds up onto the
surface of the condenser, automatically using
water that is condensed from the clothes during
operation. However, you can clean the condenser
manually if you want to clean it more often.
CAUTION
• Remove all of the clothes from the appliance.
1
Open the dryer's door and pull out both inner
and outer filter.
2
Pour 1 litre of clean water slowly into the
entrance.
• Do not pour the water quickly as it will spill
out.
• Pouring more that 1.5 litres of water into the
compartment will cause water to leak back
out.
3
Reinsert both inner and outer filter and close
the dryer's door.
4
Turn on the appliance.
5
Press the
Condenser Care
button.
6
Hold the
Start/Pause
button to start the
cleaning of the condenser.
• The cleaning of the condenser proceeds for
1 hour.
7
Open the dryer's door to provide the appliance
with enough air circulation for more thorough
drying of the tub after the cleaning has ended.
WARNING
• For safety reasons, do not allow children or
animals to enter the appliance. It may cause
damage or injury.
Thawing out the Appliance
Running thawing mode
1
Turn on the appliance. Press and hold the
Drum Care
and
Anti Crease
button at the
same time for 3 seconds.
NOTE
• Only
Power
and
Start/Pause
buttons work
when the thawing mode is activated.
• It does not allow you to change the thawing time
manually.
• To deactivate the thawing mode, turn off the
appliance.
Loading ...
Loading ...
Loading ...