QDHR50LZ Owner’s Manual and Installation Instruction

Loading ...

 49-5000430 Rev. 2

ENGLISH

5HPRYLQJ&ROOHFWHG:DWHU

There are 2 ways to remove collected water:

Use the bucket. When the bucket is removed, the unit will shut

off. Empty and replace the bucket.

IMPORTANT: Do not use the hose if using the bucket to collect

water. When the hose is connected, water will flow through it

onto the floor instead of into the bucket.

NOTES:

• Do not remove the bucket while the dehumidifier is operating

or if it has just stopped operating. This might cause some

water to drip from the drain pan.

• The bucket must be in place and securely seated for the

dehumidifier to operate.

Use a hose. Water can be automatically emptied into a floor

drain by attaching a garden water hose (not included).

1. Remove the bucket from the front of the unit.

2. Open the drain cover on the side of the unit.

3. Thread a garden hose (not supplied) onto the nozzle, cut to

length, and lead it to the floor drain.

4. Replace the bucket in the unit.

NOTE: The bucket must be in place and securely seated for the

dehumidifier to operate.

$OZD\VPDNHVXUHWKHZDWHUEXFNHWLVORFNHGLQWRSODFHRQWKHGHKXPLGLILHU

Water Level

The dehumidifier will turn off automatically when the bucket

is full, or when the bucket is removed or not replaced in the

proper position.

The bucket must be replaced in the proper position for the

dehumidifier to work. The empty indicator will blink and the

dehumidifier will not run if the bucket is not in the proper

position.

%XFNHW2SHUDWLRQ

DO NOT remove the foam piece in the bucket assembly.

If removed the Dehumidifier will not work properly.

USING THE DEHUMIDIFIER

Loading ...

Owner’s Manual and Installation Instruction - Page 8