Loading ...
Loading ...
Loading ...
Familiarising yourself with your appliance en
37
Tool Use
Professional beating whisk
1
¡ Beat egg whites and cream.
¡ Make light dough, e.g. sponge
mixture.
Whisk
1
¡ Beat egg whites and cream.
¡ Make light dough, e.g. sponge
mixture.
1
Depending on the model
Fine adjustment of the professional
whisk
Use the fine adjustment system to
correct the distance between the
bowl and the professional beating
whisk.
Note:The professional beating whisk
is factory-set so that ingredients are
mixed together perfectly.
Correcting tool adjustment
ATTENTION!
The appliance and tools can be dam-
aged if a wrong tool setting is used.
▶
Never operate a tool that touches
the bowl.
Requirements
¡ The mains plug is not inserted.
¡ The swivel arm is open.
¡ The professional beating whisk is
inserted.
¡ The bowl has been inserted.
1. Hold the beating whisk at the bot-
tom with one hand and release the
lock nut clockwise using a spanner
wrench.
→Fig.
3
2. To change the distance, turn the
tool.
→Fig.
4
Observe the values in the table:
Setting Distance
Optimum setting 3mm
One turn clockwise 1mm more
One turn anticlock-
wise
1mm less
3. Press the release button and push
the swivel arm down until it en-
gages.
4. Check the setting.
5. Press the release button and raise
the swivel arm until it engages.
6. Hold the beating whisk at the bot-
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
Symbols
You can find an overview of the sym-
bols used on your appliance here.
Symbol Description
Marking on the protective cover
for drive2.
Attachment marking on the pro-
tective cover for drive3.
Position marking on drive3.
Parked position
Your appliance is equipped with an
automatic parked position.
After the appliance has switched off,
the drives will continue moving for a
few seconds until the correct parked
position is reached.
Note:The swivel arm will only open
or close with the inserted tool when
the drive is located in the correct
parked position.
The following causes result in an
incorrect parked position:
¡ The power supply was interrupted
during processing.
Loading ...
Loading ...
Loading ...