Loading ...
Loading ...
Loading ...
Final Drive Oil u Changing Final Drive Oil
89
Maintenance
Changing Final Drive Oil
1.
Place your motorcycle on the side stand
on a level surface.
2.
Open the final gear cover. 2 P. 70
3.
Place a drain pan under the drain bolt.
4.
Remove the oil fill hole cap, O-ring, drain
bolt, and sealing washer to drain the oil.
5.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
6.
Fill the final gear with the recommended
oil. 2 P. 63
7.
Check the oil level. It should be flush
with the lower edge of the oil fill hole.
8.
Install a new O-ring onto the oil fill hole
cap. Tighten the oil fill hole cap.
9.
Check that there are no oil leaks.
10.
Close the final gear cover.
Oil fill
hole cap
Lower edge
Sealing washer
Drain
bolt
O-ring
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
Required oil: 6.8 US oz (200 cm
3
)
Torque: 5.9 lbf·ft (8 N·m, 0.8 kgf·m).
Loading ...
Loading ...
Loading ...