Loading ...
Loading ...
Loading ...
— Towing Hook Breakdown Warning Light — If
Equipped
This light illuminates when there is a failure with the tow
hook. Contact your authorized dealer for service.
Yellow Indicator Lights
— 4WD Low Indicator Light — If Equipped
This light alerts the driver that the vehicle is in the
four-wheel drive LOW mode. The front and rear drive-
shafts are mechanically locked together forcing the front
and rear wheels to rotate at the same speed. Low range
provides a greater gear reduction ratio to provide increased
torque at the wheels.
Refer to “Four-Wheel Drive Operation — If Equipped” in
“Starting And Operating” for further information on four-
wheel drive operation and proper use.
— 4WD Lock Indicator Light
This light alerts the driver that the vehicle is in the
four-wheel drive LOCK mode. The front and rear drive-
shafts are mechanically locked together, forcing the front
and rear wheels to rotate at the same speed.
Refer to “Four-Wheel Drive Operation” in “Starting And
Operating” for further information on four-wheel drive
operation and proper use.
— Active Speed Limiter Fault Indicator Light —
If Equipped
This light will turn on when there is a fault detected with
the Active Speed Limiter.
— Electronic Stability Control (ESC) Indicator
Light
The “ESC Indicator Light” in the instrument cluster will
come on when the ignition is placed in the ON/RUN
position. It should go out when the engine is running. If the
“ESC Indicator Light” comes on continuously with the
engine running, a malfunction has been detected in the
ESC system. If this light remains on after several ignition
cycles, and the vehicle has been driven several miles
(kilometers) at speeds greater than 30 mph (48 km/h), see
your authorized dealer as soon as possible to have the
problem diagnosed and corrected.
• The “ESC Off Indicator Light” and the “ESC Indicator
Light” come on momentarily each time the ignition is
placed in the ON/RUN position.
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 125
Loading ...
Loading ...
Loading ...