Loading ...
Loading ...
Loading ...
Adjusting the height
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Fold down
– To fold down: press the button, arrow 1,
and press down the head restraint, ar-
row 2.
– Forward: fold the head restraint toward
the front as far as it will go. Make sure
that the head restraint engages cor-
rectly.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
1. Fold down the rear seat backrest, refer
to page 231, in question.
2. Pull head restraint up against the resist-
ance.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory
function:
– Seat position.
– Exterior mirror position.
– Height of the Head-up Display.
General information
Different settings can be assigned to two
memory locations.
The setting of the lumbar support is not
stored.
Seite 91
Seats, mirrors and steering wheel CONTROLS
91
Online Edition for Part no. 01405A2C181 - II/21
Loading ...
Loading ...
Loading ...