Loading ...
Loading ...
Loading ...
10
ENGLISH
FROTHING MILK
We recommend that you use pasteurised 1 or 2% milk. The milk should be quite cold, ideally bet-
ween 42° F and 50° F (6 and 10° C). After having used the steam or hot water functions, the nozzle
may be hot, and we recommend that you wait for a few moments before handling it.
Check that the steam
nozzle is correctly
installed.
Fill a frothing pitcher
one-third and immerse
the nozzle in the milk.
Press the “steam” button
and follow the
instructions on the screen.
Once your milk is frothed
to your liking…
press the “steam” button
to stop the cycle.Cycle
does not stop immediately.
To remove any remaining milk
from the steam nozzle, place a
cup under the nozzle and press
the “ hot water ” button .
Run for at least 10
seconds, then again
press the button to
stop steam generation.
To interrupt the steam function, press any button.
If the nozzle is blocked, clean it out with the included needle.
The maximum duration for production of steam per cycle is limited to 2 minutes.
You can remove the steam nozzle for thorough cleaning. Wash it using a brush
with water and a little non-abrasive dishwashing liquid. Rinse and dry. Before
re-assembly, make certain that the air inlet holes are not clogged by milk residue.
If necessary clean out the holes with the needle included with the machine.
PREPARING HOT WATER
While the screen displays the drink selection menu, press the “hot water” button .
A message will ask you to place a cup under the steam nozzle. Again press the
“hot water” button to produce hot water.
To interrupt the hot water function, press any button. If the nozzle is blocked, clean it out with the needle
included. The maximum amount of hot water per cycle is limited to 10 oz/300 ml.
AUTO-CAPPUCCINO SET XS 6000 (SOLD SEPARATELY)
To prevent the milk drying on and in the auto-cappuccino accessory we strongly recommend that you
immediately:
- put clean water inside the jug and reinstall the dierent components
- run a “steam” cycle
- clean all parts with a moist cloth.
You can also use our special XS 4000 cleaner for milk systems.
Join the various components to each other.
Choose the cappuccino or cae latte posi-
tion of the special steam nozzle.
Cleaner for
milk systems.
Fill in the milk recipient and
place a cup or a glass under
the auto-cappuccino nozzle.
Press the key to launch
and then stop the cycle
.
Place your cup or glass under
the coee outlet and launch
the coee/espresso cycle.
The auto-cappuccino accessory makes it easy to prepare a cappuccino or a cae latte. It is comprised of a special nozzle with
two-positions/markings and a brushed stainless steel milk jug and tubes.
XS 6000
XS 4000
The tube must not be twisted to ensure that the button is held in the correct position.
IFU KRUPS Nafta_Premium_USA_xxxxxxxx 31/05/10 14:33 Page10
Loading ...
Loading ...
Loading ...