Loading ...
Loading ...
Loading ...
Strong/1-4 Cup Button
Select the Strong/1-4 Cup button to give any cup size a bolder taste. It is ideal
for brewing 1-4 cups because it slows down the water flow to extract the
water evenly over a smaller amount of coffee, which enhances strength and
flavor for smaller batches. The result is bolder, more full-bodied cup of coffee.
To activate, press the Strong/1-4 Cup button.
Note:This feature must be activated before you press Select/Off button to
activate Brew Now. You cannot turn on/off this feature once brewing has
started.
The coffeemaker will remain in Strong/1-4 Cup mode until you change it back
to regular strength by pressing the Strong/1-4 Cup button again, or until you
unplug the coffeemaker.
Presoak Feature
This feature presoaks your coffee with water to release more flavor. The effect
is similar to the pour-over artisan coffee-making process “blooming”, which
fully extracts your grounds to create a fuller, richer taste.
The Fresh Brew™ Timer Feature
The Fresh Brew™ Timer tracks the freshness
of coffee since the last brew. The timer
automatically activates at the start of the
brewing cycle. Press the Fresh Brew™ Timer
button once and the clock will change to
display the amount of time that has passed
since brewing started. Push again to display
current time. (Figure 22)
Note: The Brew Now green indicator must
be lit for the Fresh Brew™ Timer feature to
operate. The clock time and the Delay Brew
time will not be displayed when the fresh brew
time is displayed.
Figure 22
Using the Water Filtration System
Congratulations! You are the owner of a
MR.COFFEE
TM
water filtration system. This carbon-
based water filter improves the taste of your coffee
by removing up to 97% of the chlorine from the water
you use to brew your coffee. Before using, look for
the Mr. Coffee
TM
Water Filtration Friendly symbol
on the bottom of your filter basket. If you do not see
this symbol, please call 1-800-672-6333. If you see the
symbol, follow these steps to use your filter:
Frame
Filter
Disk
Red
Indicator
1
Align the red indicator
on the frame to the
letter that corresponds
with the month that
you are using the disk
for the first time. This
serves to remind you to
change the disk every
month (approx. 30
brewing cycles).
2
When you are done
brewing your coffee,
rinse the water filter
with fresh water. Do
not put your water filter
in the dishwasher.
3
To replace the
water filter disks: slide
the used disk from
your water filtration
system. To insert the
new disk, slide disk
into the frame.
Note: This coffeemaker uses Water
Filtration Grey Frame part number 189274.
Water Filtration Disk Replacement:
Your water filtration disk will need to be replaced
once a month (approx. 30 brew cycles). If the
machine will not be in use for an extended period
of time, rinse the water filter with running water
and clean the coffeemaker before use.
Replacement water filtraton frames part
number:189274 and disks can be purchased
online at www.mrcoffee.com or by calling
1-800-MRCOFFEE(1-800-672-6333) in the U.S. or
1-800-667-8623 in Canada.
16 17
Loading ...
Loading ...
Loading ...