Loading ...
Loading ...
Loading ...
4
IMPORTANT SAFETY INSTRUCTION CONT.
READ AND SAVE THESE INSTRUCTIONS
Symbols
• The labels on your tool may include the following symbols.
The symbols and their denitions are as follows:
V .......................volts
A .......................amperes
Hz .....................hertz
W ......................watts
min ....................minutes
or AC ............alternating current
or DC .........direct current
n
o
...................... no load speed
......................Class I Construction
......................earthing terminal (grounded)
......................safety alert symbol
.......................Class II Construction (double insulated)
.../min or rpm .....revolutions or reciprocations per minute
Transporting your Vacuum
To move your vacuum cleaner from room to room, unplug the unit and either push
the appliance or carry using the carry handle.
Never pull or carry the vacuum cleaner by its cord.
• When using an extension cord, be
sure to use one heavy enough to carry
the current your product will draw. An
undersized cord will cause a drop in
line voltage resulting in loss of power
and overheating.
The following table shows the correct
size to use depending on cord length
and nameplate ampere rating. If in
doubt, use the next heavier gauge. The
smaller the gauge number, the heavier
the cord.
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More
Than
Not more
Than
American Wire Gauge
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
Loading ...
Loading ...
Loading ...