Loading ...
Loading ...
Loading ...
Operating the appliance en
29
Ï intensiveZone *
intensiveZone
Perfect for a mixed load. You can wash
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket
is intensified, the rinsing temperature
is increased slightly.
ï Shine and Dry *
Shine and Dry
By increasing the amount of water
during the rinse cycle and extending the
drying phase, stains are prevented and
the drying result is improved. There is a
slight increase in the energy
consumption. Rinse aid is
recommended for the high gloss drying
function (even when using combination
detergents).
ß Energy Save *
Energy Save
The “Energy Save” function can be
used to reduce water and energy
consumption. The running time
is extended for optimum cleaning and
drying results.
1 Operating the
appliance
Operating the appliance
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. They refer to normal
conditions and the water hardness set
value °E 16 - 20 medium. Different
influencing factors such as water
temperature or line pressure may result
in deviations.
Changing the settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory settings.
Change the setting as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button {8 for 3
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button >)* until the
required setting is indicated on the
display window at the top @.
5. Make the setting with setting buttons
+ -X.
6. Press and hold the Info button {
8 for 3 seconds.
The chosen setting has now been
stored.
Tip: If you change several settings, first
make all changes in succession. Now
press the Info button { 8 for
3 seconds. This saves all set values in
the appliance.
Loading ...
Loading ...
Loading ...