LG Electronics 77087

User Manual - Page 8

For 77087.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
8
INSTALLATION INSTRUCTIONS
Window Requirements
Size
NOTE:
Secure all supporting parts to firm wood,
masonry, or metal.
This room air conditioner is designed for installation in
standard double-hung windows with actual opening
widths from 22” to 36”.
The upper and lower window sash must open
sufficiently to allow a clear vertical opening of 13”
from the bottom of the upper sash to the inside sill.
The height offset between the inside sill and outside sill
must be less than 1 ¼".
22" to 36"
13" min
Clearance
Proper clearance enhances the cooling efficiency of the
product.
1
If a storm window presents interference, fasten a 2”
wide wood strip to the inner window sill across the
full width of the sill. The wood strip should be thick
enough to raise the height of the window sill so that
the unit can be installed without interference by the
storm window frame.
2
(See drawing.) The top of the wood strip on the
inside sill should be approximately ¾” higher
than the storm window frame or wood strip on the
outside sill to help condensation to drain properly to
the outside.
3
If necessary, install a second wood strip (same
thickness as first strip) across the full width of the
outer sill, flush against the back of the inner sill. This
will raise the L bracket as shown.
Indoors
Inner Sill
Outer Sill
Storm
Window Frame
Wood Strip Mounted
on Top of Inner Sill
L Bracket
¾"
Clearance
Wood Strip for
L Bracket
Outdoors
Preparation of Cabinet
1
Insert the upper and bottom curtain panel rails into
the upper and bottom panel guides on each side of
the unit. Fasten the panels to the unit with 4 type A
screws on each side.
Upper Guide
Right Curtain Panel
Left Curtain Panel
Bottom Guide
Screws (Type A)
NOTE:
Use a long screwdriver to make installing the
screws easier.
CAUTION
The bottom panel guides are easily broken. Be
careful with them when installing the cabinet.
2
Cut the adhesive-backed window sash seals (Foam-
PE) to the proper length. Peel off the backing and
attach the foam to the underside of the window
sash and the bottom of the window frame.
Foam-PE
(Adhesive backed)
Loading ...
Loading ...
Loading ...