Loading ...
Loading ...
Loading ...
148
Optional Accessories
J
Lighting: If the unit supports this feature, choose from the
options below.
• J (FLASH POWER PRIORITY): Gain range by slightly reduc-
ing coverage.
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase coverage
for more even lighting.
K
Master: Assign the master ash to group A (Gr A), B (Gr B),
or C (Gr C). If OFF is selected, output from the master ash
will be held to a level that does not a ect the nal picture.
Available only if the unit is mounted on the camera hot
shoe as a master ash for FUJIFILM optical wireless remote
ash control in TTL, TTL%, or M mode.
K
Number of ashes: Choose the number of times the ash
res each time the shutter is released in MULTI mode.
L
Channel: Choose the channel used by the master ash for
communication with the remote ash units. Separate
channels can be used for di erent ash systems or to pre-
vent interference when multiple systems are operating in
close proximity.
L
Frequency: Choose the frequency at which the ash res
in MULTI mode.
Attaching Adapter Rings
Attaching Adapter Rings
1
Remove the front ring.
R
R
If you have trouble re-
If you have trouble re-
moving the front ring,
moving the front ring,
grip the entire ring
grip the entire ring
and rotate it as shown.
and rotate it as shown.
2
Attach the adapter ring
as shown, with the pro-
jections facing out.
Q Keep the front ring and lens cap in a safe place
when not in use.
Q Attach the adapter ring AR-X100 before attaching
LH-X100 lens hood, PRF-49S protector lter, or third-
party lters.
Loading ...
Loading ...
Loading ...