Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
The ironing board
cover becomes
wet or water
droplets come out
of the soleplate.
Steam has condensed on
the ironing board cover
after a long ironing session.
Replace the ironing board cover if the foam material
has worn out. You can also add an extra layer of felt
material under the ironing board cover to prevent
condensation on the ironing board.
You may have an ironing
board that is not designed
to cope with the high steam
rate of the steam generator.
Put an extra layer of felt material under the ironing
board cover to prevent condensation on the ironing
board.
There is too much
steam coming out
of the iron.
The default setting of the iron
is the OptimalTemp setting. In
this setting the iron provides
a high steam output.
Activate the ECO mode to iron with a lower
steam output. See section ‘Energy saving’ in this user
manual.
This iron has been approved by The Woolmark Company Pty Ltd for
the ironing of wool only products provided that the garments are ironed
according to the instructions on the garment label and those issued by the
manufacturer of this iron. R1303. In United Kingdom, Eire, HongKong and
India, the Woolmark trademark is a Certication trademark.
ENGLISH 13
Loading ...
Loading ...
Loading ...