Loading ...
Loading ...
Loading ...
17
Detergent solution
pump
Information about blockages
Take the drain hose out of the retainer.
Remove the sealing cap from the drain hose and allow the detergent
solution to flow out.
– The container for the drained water may have to be emptied several
times.
– When no more water runs out, put the sealing cap back in place.
Place the drain hose into the retainer.
Carefully unscrew the pump cover (residual water).
– Clean the interior, pump cover thread and pump housing (the
impeller in the detergent solution pump must be able to rotate).
Refit the pump cover and screw it on tightly.
Place the service cap in the 4 clip-in slots and secure to the housing
using the lock pins.
To prevent unused detergent from flowing straight into the drain during
the next wash:
Pour 1 litre of water into compartment II and start the Empty programme.
Turn the programme selector to Stop (Off).
Use a screwdriver to release the lock pins.
Fold down the service panel and remove to the
top.
Draining the water
Cleaning the detergent solution pump
Loading ...
Loading ...
Loading ...