Sunny Health & Fitness SF-B1970 Belt Drive Pro Lite Indoor Cycling Bike

User Manual - Page 12

For SF-B1970.

PDF File Manual, 14 pages, Read Online | Download pdf file

SF-B1970 photo
Loading ...
Loading ...
Loading ...
11
EXERCISE COMPUTER
FUNCTION BUTTON:
MODE:
1. Press the button for selection function display value on the computer.
2. Press the button and hold for 2 seconds to reset all values except odometer
to zero.
Note: When the user replaces the batteries, all the values will reset to ZERO automatically.
OPERATIONS:
AUTO ON/OFF: The computer will show the workout value automatically as the user begins to
exercise. When the bike has become inactive or without any exercise over 4 minutes, the computer
will turn off and the workout value on the odometer will be held. While the user starts the exercise
again, the workout value on odometer will accumulate continuously.
AUTO SCAN: After the computer is powered on or the MODE button is pressed, the computer will
display all function values: TMR-SPD-DIST-CAL-ODO-RPM-PUL (repeat). Every function will display
for 6 seconds.
FUNCTIONS:
SPD (SPEED): Displays the current speed being obtained. The range is from 0.0 to 99.9 MPH (Miles
per Hour).
DST (DISTANCE): Counts the total distance of an exercise from start to finish. The range is from
0.00 up to 9999 M (Miles).
TMR (TIME): Counts the total time of an exercise from start to finish. The range is from 00:00 up to
99:59.
CAL (CALORIES): Counts the total amount of calories burned during an exercise from start to finish.
The range is from 0.0 to 9999 KCAL. (The data is a rough guide which cannot be used in medical
treatment.)
ODO (ODOMETER): Displays the total amount of distance from the first use. The range is from 0.0
to 9999 M (Miles). User also can press the MODE button to display the odometer value.
RPM: Counts each stroke within a minute. The range is from 0 to 400.
PUL (PULSE): Displays the user's heart rate in beats per minute during exercise. (The data is a rough
guide which cannot be used in medical treatment.)
NOTE: please put your hands on the pulse sensors when in PULSE function.
Note:
1. If the display appears incorrectly or becomes difficult to read, please install new batteries and try
again.
2. Battery Spec: 1.5V UM-4 or AAA (2PCS).
3. Always change both batteries at the same time. Do not mix battery types and do not mix old and
new batteries. Dispose batteries according to your state and regional guidelines.
Loading ...
Loading ...