Loading ...
Loading ...
Loading ...
Before using for the first time en-us
19
7.7 Rack heights
Set the racks at the right height.
Appliance height 32 inches with silverware basket
Level Upper rack Lower rack
1 max. ø 8.5" 12"
2 max. ø 9.5" 11"
3 max. ø 10.5" 10"
Before using for the first time
8 Before using for the
first time
Before using for the first time
Apply the settings for the first use.
8.1 Initial use
Before the first use, or after a fac-
tory reset, you will need to config-
ure the settings.
Tip:Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the HomeConnect™ app.
→
"HomeConnect™ quick start",
Page32
Requirement:The appliance has
been installed and connected.
1. Add special salt.
2.
Add rinse aid. →
Page21
3. Switch on the appliance.
→
Page28
4. Set the water softening system.
→
Page20
5. Set the amount of rinse aid.
→
Page22
6. Add detergent.
7. Start the Program with the
highest cleaning temperature
without dishware.
To remove any marks from wa-
ter or other residues, we rec-
ommend you operate the appli-
ance without dishware before
using it for the first time.
Tip:You can change these set-
tings and other Basic settings
→
Page30
at any time.
Water softening system
9 Water softening
system
Water softening system
Hard water leaves limescale on
dishware as well as the washing
tank, and parts of the appliance
may become blocked.
To ensure good dishwashing re-
sults, you can treat the water with
special salt and the water soften-
ing system. To avoid damage to
the appliance, water with a hard-
ness above 9°E must be soft-
ened.
9.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be se-
lected here.
You can find out how hard your water is from your local water company
or by using a water hardness tester.
Loading ...
Loading ...
Loading ...