Loading ...
Loading ...
Loading ...
21
Fabric softener
How the fabric softener is dispensed
The fabric softener is placed into the dispenser on the top of the agitator. During the rinse the
machine spins to release the fabric softener, delivering it down the agitator stem as the machine
fills for the final deep rinse.
Note: ECO and QUICK WASH options are not designed to be used with fabric softener. Cycles
using these options do not use a deep rinse so the machine cannot dispense fabric softener
correctly.
How much fabric softener?
There is a ring on the dispenser cup to use as a guide for
the amount of fabric softener to add for a full load. Smaller
loads require less fabric softener.
Cleaning the dispenser
When using fabric softener, rinse your dispenser at the end
of each wash.
1
Separate the cup from the dispenser body by pushing
downward on the base of the cup.
2
Rinse both parts of the dispenser using warm soapy water.
Scrud
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric
softener comes into contact with detergent. This build-up is not brought about by a fault in the
machine. If scrud is allowed to build up in the machine, it can result in stains on your clothes
and/or an unpleasant smell in your washer.
If you wish to use fabric softener we recommend:
Using fabric softener sparingly.
When filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle has finished.
Clean your machine regularly (refer page 27).
Cold water washing increases the chance of this build-up occurring. We recommend a WARM or
HOT wash at regular intervals, eg approximately every 5th wash.
Fabric softener of a thinner consistency is less likely to leave residue on the dispenser and
contribute to a build-up.
Fig.32 Push cup through dispenser
with thumb to remove
Loading ...
Loading ...
Loading ...