Loading ...
Loading ...
Loading ...
VAIO Digital Studio™ System Reference Manual
46
To install a 3.5-inch internal hard disk drive (all models)
1 Configure the jumpers on the new drive as a slave device (see your
drive’s documentation for configuration instructions).
2 Remove the side cover (see “Removing the Side Cover” on page 28).
3 Disconnect the drive connector (A in diagram).
4 Disconnect the power connector (B in diagram).
5 Pull out on the tab (C) that secures the drive holder to the chassis.
Power
connector
Jumpers
Drive
connector
A
B
C
Disk drive holder
Tab
Power supply
connector
Drive connector
Loading ...
Loading ...
Loading ...