User Manual LG WT-H7506 7.5kg Top Load Washing Machine

• Owner's manual - (English)

Table of contents

• Identification of Parts
• Washing Programs
• Care and Maintenance
• Troubleshooting
• Specification

USER MANUAL WASHING MACHINE

Identification of Parts

Body

Washing Programs

Soak Wash

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. SOAK mode can be used with the FUZZY or JEAN or SILENT or FAVORITE program.

1. Press the POWER (AUTO OFF) button to turn power on.

2. Press the PROGRAM button to select the washing program.

3. Press the WASH button, to select SOAK program.

• The Soak Function will only operate in Auto wash (Fuzzy logic mode) by pressing the Wash Button until the Soak symbol illuminates. The 3 available Soak +Wash times are 40, 50, or 60 minutes. These times include the wash time.

4. Add the Detergent.

• The appropriate quantity of Detergent marked next to the WATER LEVEL of WATER-DETERGENT.

5. Add the laundry and press the START/PAUSE button.

• The WATER LEVEL will be shown and water will be supplied.

6.

Care and Maintenance

Grounding Method

Earth wire should be connected.

If the earth wire is not connected, there is possible a danger of electric shock caused by the current leakage.

Grounding Method with Ground insert space Terminal

If the AC current outlet has a ground terminal, then separate grounding is not required. Note that AC power outlet configurations may differ from country to country

Other Grounding Method

Burying Copper Plate

Connect the Ground Wire to a Ground Copper Plate and bury it more than 75cm in the ground.

Using Ground Wire

Connect the ground Wire to the socket provided exclusively for Grounding.

Using a Short Circuit Breaker

If grounding methods described above are not possible, a separate circuit breaker should be employed and installed by a qualified electrician

Cold water washing

• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular intervals e.g. every 5th wash should be at least a WARM one.

When you have finished

• Turn off taps to prevent the chance of flooding should a hose burst.

• Always unplug the power cord after use.

To Clean the Filter in the Inlet Valve

1. Close the tap before turning off the power. HOT/COLD(WARM) and then press the [START/PAUSE] button to briefly start a wash in order to completely remove all water pressure from the hoses.
2. Turn off the power before pulling out the cord.
3. After removing the water supply hose pull out the filter. Then use a brush to clean the filter.
4. Replace the filter after cleaning it.

To Clean the Pump casing (for pump model)

1. Place a towel on the floor under the drain pump cap. Excess water may flow out.
2. Turn the cap counterclockwise and pull it out
3. Remove any foreign objects and fluff inside pump casing and from the filter
4. Replace the cap. Insert the filter along the guide ribs inside the pump casing. Filter must face the guide ribs inside pump casing and securely turn the cap clockwise.

Cleaning and Maintenance

When there is a possibility of freezing ambient temperatures.

• Close the water taps and remove the Water Supply Hose.

• Remove the water which remains in the water supply.

• Lower the drain hose flat against the ground and drain any remaining water left in the bowl the and drain hose.

If frozen

• Remove the water supply hose, and immerse it in HOT water at approx.. 40°C.

• Pour approx.. 2 liters of HOT water at approx.. 40°C, into the bowl and let it stand for 10 minutes.

• Connect the water supply hose to the water tap and confirm that the washing machine performs the supply and drainage of water.

Cleaning the Inside of your Washer

If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean the inside of your washer.

• Fill your washer with HOT water.

• Add about two cups of dishwashing detergent.

• Let it operate for several minutes.

• Stop the washer, tun off the power without draing the water, then open the lid and leave it to soak overnight.

• After soaking, drain the washer by briefly selecting a spin cycle until water has drained, and run it through a normal warm water cycle without adding any detergent or clothes.

Or use TUB CLEAN PROGRAM periodically.

We do not recommend that you wash clothes during this procedure.

Products that might damage your washing machine

• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.

• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint (Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in washer or dryer without presoaking and rinsing them first.)

• Some pretreatment sprays or liquids can damage your washer’s control panel.

• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in your washer.

• Do not use your washer lid as a work surface.

Use of Handle locker

How to use Handle Locker

If you feel uncomfortable using the folding handle, you can use the fixed handle option.

• Push both Locks towards the centre of the lid, this will free the handle.

• To lock the handle in back place, push the locking slides towards the outside of die lid.

* refer to the below Picture.

Troubleshooting

Common washing problems

Many washing problems involve poor soil & stain removal, residues of lint and scum, and fabric damage. For satisfactory washing results, follow these instructions.

WASH PROBLEM

Troubleshooting

Symptom	Error Message	Check list
Water Supply Failure		• Is the water tap shut off? • Is the water supply cut off? • Is the tap or water supply hose frozen? • Is the water pressure low or is the filter of the inlet valve clogged with impurities? • Is the Hot hose connected to cold? • Is the Cold hose connected to hot? * If the Washing Machine is subjected to an unstable supply of water , " IE " is on the DISPLAY.
Drainage Failure		• Is the drain hose positioned correctly? • Is the drain hose bent or placed too high? • Is the internal part of the hose or drain pump (only pump model) clogged with impurities? • Check if power has gone off.
Spin Failure / Unbalanced Load		• Is the laundry evenly balanced? • Is the washing machine placed on a flat surface? • Is too much soap being used.
Door(Lid) Open		• Is the lid closed?
Abnormal water level sensing		• Please call your nearest LG Electronics service center for help.
Water Inlet overflow.
Abnormal motor
I-Sensor Error
Clutching Error

USING SMARTDIAGNOSIS™

- Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax machine, and so has no meaning except to the call center.

- SmartDiagnosis™ cannot be activated if the washer does not power up. If this happens, then troubleshooting must be done without SmartDiagnosis™.

If you experience problems with your washer, call to Customer information center. Follow the call center agent’s instructions, and do the following steps when requested:

1. Press the POWER button to turn on the washer. Do not press any other buttons or turn the cycle selector knob.

2. When instructed to do so by the call center, place the mouthpiece of your phone very close to the POWER button.

3. Press and hold the WATER TEMP button for three seconds, while holding the phone mouthpiece to the icon or POWER button.

4. Keep the phone in place until the tone transmission has finished. This takes about 6 seconds, and the display will count down the time.

• For best results, do not move the phone while the tones are being transmitted.

• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.

• Pressing the POWER button during the transmission will shut off the SmartDiagnosis™.

5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able to assist you using the information transmitted for analysis at the call center.

Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting through service calls.

The effectiveness of this feature depends upon various factors, including, but not limited to, the receiption of the cellular phone being used for transmission, any external noise tha t may be present during the transmission, and the acoustics of the room where the machine is located.

Accordingly, LG does not guarantee that Smart Diagnosis would accurately troubleshoot any given issue

Blanket Folding Method

The blanket and Large size cloth washing method

The Clothes should not exceed 160x200 cm (WidthxLength)

Blanket folding method before washing

1. Fold the blanket in half along the length.

2. Fold the blanket into 3 parts, by a left-width around 30 cm.

3. Roll the blanket before put in the tub

4. When input the clothes in the tub, the clothes should not over balance lower (Red line) otherwise, it may cause damage to the blanket.

Specification