Loading ...
Loading ...
Loading ...
10
■ Align vent tab (B) with oven frame (A) as shown.
■ Using one #8-18 x 3/8" (9.5 mm) screw (E) on each side
of the vent tab (B), fasten the vent securely to the oven.
7. Replace the oven racks.
8. Replace the oven door by inserting the ends of hinges into
the hinge slots in the oven frame.
9. Push the hinges in as far as they will go and open the oven
door. You should feel the oven door drop into place.
10. Rotate both hinge latches back to the locked position.
11. Check that the door is free to open and close. If it is not,
repeat the removal and installation procedures. See the
“Prepare Built-In Oven” section.
12. Reconnect power.
13. The display panel will light briey, and “12:00” should appear
in the display.
14. If the display panel does not light, reference the “Assistance
or Service” section of the Use and Care Guide or contact the
dealer from whom you purchased your oven.
Complete Installation
1. Check that all parts are now installed. If there is an extra
part, go back through the steps to see which step was
skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.
Check Operation of Single Oven
1. Turn power on.
2. At rst use, set up the clock and any other preferences
if available. For more information, read the Use and Care
Guide.
3. Press BROIL on single oven models.
4. Set the temperature.
5. Press START/ .
If oven does not operate, check the following:
■ Household fuse is intact and tight, or circuit breaker has
not tripped.
■ Electrical supply is connected.
■ See “Troubleshooting” section in the Use and Care
Guide.
6. When oven has been on for 5 minutes, feel for heat.
If you do not feel heat or if an error message appears in the
display, turn off the oven and contact a qualied technician.
7. Press OFF/CANCEL/ .
If you need Assistance or Service
Please reference the “Assistance or Service” section of the Use
and Care Guide or contact the dealer from whom you purchased
your built-in oven.
A
C
D
B
E
A. Oven frame
B. Vent tab
C. Oven vent
D. Bottom vent trim
E. #8-18 x 3/8"
(9.5mm) screw
Loading ...
Loading ...
Loading ...