Loading ...
Loading ...
Loading ...
User liability
It is the responsibility of the user to contact a
qualified electrician if a power outlet as described
in this manual is not available.
WARNING!
•
Connect to a power outlet with a protective
earth.
•
Do not remove the earth connection.
•
Do not use an adapter.
•
Do not use an extension cord.
Electrical connection
•
The dryer cabinet is to be connected to
220-240V, 1-Phase, 50-60Hz and the
protective power outlet. The power outlet must
be installed and earthed according to
applicable regulations.
•
The dryer cabinet is delivered ready for
connection with a 2 m long cable with earthed
plug.
•
Do not change the cable and plug supplied
with the dryer cabinet. If the plug does not
correspond with the power outlet this must be
rectified by a qualified electrician.
•
The dryer cabinet must be connected using
the supplied connection cable and must not
be permanently connected!
•
The power outlet must be positioned so that
the plug can be removed when necessary.
•
The connection cable is drawn out at the rear
of the dryer cabinet on delivery from the
factory. If necessary the connection cable can
be drawn out of the rear hole in the top cover.
•
Check that the connection current corresponds
with the data on the type plate and that the
main circuit is earthed correctly according to
applicable standards. We recommend that the
main circuit is fitted with a residual current
device.
•
The connection is to make up its own fuse
group.
•
The manufacturer relinquishes all responsibility
if the electrical connection is not made
according to the method set out in these
operating instructions.
If this appliance is supplied from a cord extensions
set or electrical portable outlet device, the cord
extension ser or electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
8
Electrical requirement
Loading ...
Loading ...
Loading ...