Loading ...
Loading ...
Loading ...
6.
Remove the brake caliper bracket, rear
wheel and side collars.
u Support the brake caliper assembly so
that it doesn’t hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
2.
Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
20180821193003_31MJC6600_enu_BOOK Page 96 Tuesday, August 21 2018 19:37:28 JST
Tire Puncture u Removing Wheels
Troubleshooting
93
Continued
Brake caliper
bracket
Swingarm
Lug
Slot
Loading ...
Loading ...
Loading ...