Loading ...
Loading ...
Loading ...
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
1.
Remove the right lower cowl. 2 P. 54
2.
If the engine is cold, idle the engine for 3
to 5 minutes.
3.
Turn the ignition switch to the OFF
position and wait for 2 to 3 minutes.
4.
Place your motorcycle on a firm, level
surface.
5.
Place a drain pan under the drain bolt.
6.
Remove the oil fill cap, drain bolt, and
sealing washer to drain the oil.
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
20180821193003_31MJC6600_enu_BOOK Page 62 Tuesday, August 21 2018 19:37:28 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
59
Continued
Rubber seal
Oil filter
Sealing washer Drain bolt
Loading ...
Loading ...
Loading ...