Loading ...
Loading ...
Safety Indications
EN 02
• During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a
normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food
inside the oven. In any case, the condensation disappears when the oven reaches the cooking
temperature.
•Avoid leaving food inside the oven after cooking for more than 15/20 minutes.
• Cook the vegetables in a container with a lid instead of an open tray.
•WARNING: the accessible parts can become hot when the oven is in use. Children must be kept at a
safe distance.
- Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use
detergents;
- Remove all accessories and the sliding rack kit (where present);
- Do not place tea towels
• Children under 8 must be kept at a safe distance from the appliance if not continuously supervised.
• Cleaning and maintenance should not be carried out by unsupervised children.
• Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they
can scratch the surface and cause the glass to shatter.
• Do not use a steam cleaner for cleaning operations.
• Children must not play with the appliance. The appliance can be used by those aged 8 or over and by
those with limited physical, sensorial or mental capacities, without experience or knowledge of the
product, only if supervised or provided with instruction as to the operation of the appliance, in a safe way
with awareness of the possible risks.
• In ovens with meat probe it is necessary, before making the cleaning cycle, close the hole with the nut
provided.Always close the hole with the nut when the meat probe is not used.
• Connect a plug to the supply cable that is able to bear the voltage, current and load indicated on the tag
and having the earth contact. The socket must be suitable for the load indicated on the tag and must be
having the earth contact connected and in operation. The earth conductor is yellow-green in colour. This
operation should be carried out by a suitably qualified professional. In case of incompatibility between the
socket and the appliance plug, ask a qualified electrician to substitute the socket with another suitable
type. The plug and the socket must be conformed to the current norms of the installation country.
Connection to the power source can also be made by placing an omnipolar breaker between the
appliance and the power source that can bear the maximum connected load and that is in line with
current legislation. The yellow-green earth cable should not be interrupted by the breaker. The socket or
omnipolar breaker used for the connection should be easily accessible when the appliance is installed.
• If the power cable is damaged, it must be substituted with a cable or special bundle available from the
manufacturer or by contacting the customer service department.
• Only use the meat probe recommended for this oven.
• The type of power cable must be H05V2V2-F.
- Clean the oven door;
• Failure to comply with the above can compromise the safety of the appliance and invalidate the
guarantee.
• WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot
parts.
•WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of
electric shocks.
•WARNING: before initiating the automatic cleaning cycle:
• The oven must be switched off before removing the removable parts and, after cleaning, reassemble
them according the instructions.
•Any excess of spilled material should be removed before cleaning.
• The disconnection may be achieved by having the plug accessible or by incorporating a switch in the
fixed wiring in accordance with the wiring rules.
• WARNING: Do not line the oven walls with aluminum foil or single-use protection available from stores.
Aluminum foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating
the enamel of the insides.
The shelf must be inserted completely into the cavity
• When you place the shelf inside, make sure that the stop is directed upwards and in the back of the
cavity.
• During the pyrolytic cleaning process, surfaces can heat up more than usual, children must therefore be
kept at a safe distance.
• WARNING: Never remove the oven door seal.
• The appliance must not be installed behind a decorative door in order to avoid overheating.
• No additional operation/setting is required in order to operate the appliance at the rated frequencies.
Loading ...
Loading ...
Loading ...