Documents: Go to download!
User Manual
- User Manual - (English, French, Spanish)
- Help Guide - (English)
- Warranty - (English)
- Precautions
- Notes on waterproof and dust proof features
- How to care for the unit
- Specifications
Table of contents
Reference Guide Wireless Speaker
Precautions
On safety
- If your skin touches this product for a long time when the power is on, it may cause a low temperature injury.
- Important information such as the model name is located on the inner and outer surfaces of the cap on the rear side of the unit.
On placement
- To eliminate the risk of malfunctions, avoid the following locations when placing or leaving this unit.
- A place subject to high temperatures, such as under direct sunlight or lighting equipment, near a heat source, or in a sauna
- Inside a vehicle with the windows closed (especially in summertime)
- A place subject to excessive dust
- A place subject to strong vibration
- Place this unit on a flat, level surface. When placed on a sloped surface, the unit may fall over or fall off the surface due to its own vibration, resulting in injuries, malfunctions, or performance degradation.
- Depending on the conditions where this unit is placed, it may fall over or fall off the surface. Do not leave any valuables near the unit.
- This unit is not anti-magnetic. Keep objects susceptible to magnetism (recorded tapes, watches, cash cards and credit cards with magnetic coding, etc.) away from the unit. When you carry around the unit, keep this in mind as well.
Others
- Do not use or leave the unit in an extremely cold or hot environment (temperature outside the range of 5 °C – 35 °C (41 °F – 95 °F)). If the unit is used or left in outside the above range, the unit may automatically stop to protect internal circuitry.
- At high temperature, the charging may stop or the volume may reduce to protect the battery.
- Even if you do not intend to use the unit for a long time, charge the battery to its full capacity once every 6 months to maintain its performance.
About the Voice Guidance
IMPORTANT: THE SOUND GUIDANCE IS AVAILABLE IN THIS PRODUCT ONLY IN ENGLISH
Depending on the status of the unit, the voice guidance outputs from the unit as followings.
- When entering pairing mode: “BLUETOOTH pairing”
- When establishing a BLUETOOTH connection: “BLUETOOTH connected”
- When disconnecting a BLUETOOTH connection: “BLUETOOTH disconnected”
- When pressing the BATT (battery) button to check the battery power during the unit is turned on: “Battery fully charged/Battery about 70%/Battery about 50%/Battery about 30%/Please charge”
- When pressing and holding the ST PAIR button during the Stereo Pair function: “Left/Right”
On Copyrights
- Android, Google Play and other related marks and logos are trademarks of Google LLC.
- LDAC™ is a trademark of Sony Corporation.
- The BLUETOOTH® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.
- Apple, the Apple logo, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
- Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
- USB Type-C® and USB-C® are trademarks of USB Implementers Forum.
- Other trademarks and trade names are those of their respective owners
- ™ and ® marks are omitted in the documents.
Notes on waterproof and dust proof features
(Read before using the unit)
Waterproof and dust proof performance of the unit
The unit, with the cap fastened securely, has a waterproof specification of IPX7*1 as specified in “Degree of protection against water immersion” of the IEC60529 “Ingress Protection Rating (IP Code)”*3, and a dust proof specification of IP6X*2 as specified in “Degrees of protection against solid foreign objects”*3.
Liquids that the waterproof performance specifications apply to
| Applicable | fresh water, tap water, pool water, salt water |
| Not applicable | liquids other than the above (soapy water, water with detergent or bath agents, shampoo, hot spring water, etc.) |
*1 IPX7 (Degree of protection against water immersion): For details, refer to the Help Guide.
*2 IP6X (Degrees of protection against dust): For details, refer to the Help Guide.
*3 The supplied accessories and the connectors of this unit (USB) are neither waterproof nor dust proof. To reduce the risk of fire or electric shocks, do not expose the unit to water or droplets while using either or both of the connectors (USB). Do not place a vase or any other liquid-filled container on the unit.
The waterproof and dust proof performance of the unit is based on our measurements under the conditions herein described. Note that malfunctions as a result of water immersion or dust intrusion caused by misuse by the customer are not covered by the warranty.
To avoid deterioration of waterproof and dust proof performance
Check the following and use the unit correctly.
- The unit passes the drop test from 1.22 m (4 ft) on plywood of 5 cm (2 in) thickness conforming to MIL-STD810H Method 516.8-Shock. However, this does not guarantee no damage, no breakdown, or waterproof and dust proof performance in all conditions. Deformation or damage from dropping the unit or subjecting it to mechanical shock may cause deterioration of the waterproof and dust proof performance.
- This unit does not have a design that is resistant to water pressure. Use of the unit in a location where high water pressure is applied, such as in the shower, may cause a malfunction.
- Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the unit directly. Also never use the unit in a place subject to high temperatures, such as in a sauna or near a heat source.
- Handle the cap with care. The cap plays a very important role in maintenance of the waterproof and dust proof performance. When using the unit, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the waterproof and dust proof performance may deteriorate and may cause a malfunction of the unit as a result of water or dust particles entering the unit.
How to care for the unit
Although the fabric part of the unit has water repellent treatment applied, you can use the unit more comfortably and for a longer period of time by following the maintenance procedure below.
- If the surface of the unit gets dirty in the following cases, wash the unit with fresh water (tap water, etc.) promptly to remove the dirt. Leaving dirt on its surface may cause the fabric part or the passive radiator section to discolor or deteriorate, or the unit to malfunction. Ex.
- When salt, sand, etc. is stuck on the unit after using it on a beach, pool side, etc.
- When the unit is stained with foreign substances (sunscreen, suntan oil, etc.)
- If the unit gets wet, wipe off the moisture using a dry soft cloth immediately. In addition, dry the unit in an airy place until no moisture remains.
- The sound quality may change when water enters the speaker or passive radiator section of the unit. It is not malfunction. Wipe off the moisture on its surface, and put the unit on a dry soft cloth to drain the collected water inside the unit. Then, dry the unit in an airy place until no moisture remains.
Note
- If the surface of the unit gets dirty, do not use detergent, thinner, benzine, alcohol, etc. to clean the unit because it will affect the water repellent function of the fabric part of the unit.
- Especially in cold regions, be sure to wipe off the moisture after using the unit. Leaving moisture on its surface may cause the unit to freeze and malfunction.
- If sand grains, etc. enter the fabric or other part of the unit, remove them carefully. Never use a vacuum cleaner, etc. on the unit. It may cause damage of the speaker section or other part of the unit.
Specifications
Speaker section
Full range unit: Approx. 42 mm × 51 mm (1 11/16 in × 2 1 /8 in) (2)
Enclosure type: Passive radiator model
BLUETOOTH
Communication System: BLUETOOTH Specification version 5.0
Maximum communication range: Line of sight approx. 30 m (98 ft)*1
Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*2:
- A2DP (Advanced Audio Distribution Profile)
- AVRCP (Audio Video Remote Control Profile)
- HSP (Headset Profile)
- HFP (Hands-free Profile)
Supported Codec*3:
- SBC (Subband Codec)
- AAC (Advanced Audio Coding)
- LDAC
Transmission range (A2DP): 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communications between devices.
*3 Codec: Audio signal compression and conversion format
Note: Depending on the network environment, there may be an interruption at the high bitrate transmission.
Microphone
Type: Electret condenser
Directional characteristic: Omni directional
Effective frequency range: 100 Hz - 7,000 Hz
Amplifier section
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohms loads, both channels driven, from 100 Hz – 10,000 Hz; rated 4 watts per channel minimum RMS power at stereo mode, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
General
Power: DC 5 V (using a commercially-available USB AC adaptor capable of feeding in 1.5 A) or, using built-in lithium-ion battery
Lithium-ion battery life (with playback via a BLUETOOTH connection)
- Approx. 12 hours*4 *7
- Approx. 10 hours*5 *7
- Approx. 3 hours*6 *7
Dimensions (including projecting parts and controls)
- Approx. 76 mm (3 in) dia. × 218 mm (8 5/8 in) (H)
Mass
- Approx. 580 g (1 lb 5 oz) including battery
Supplied accessory
- USB Type-C® cable (USB-A to USB-C® / Max. 1.5 A) (1)
- Strap (1) (attached to the unit)
*4 Measured value acquired by playing our specified music source with the volume level of the unit set to 34, the sound mode set to STAMINA.
*5 Measured value acquired by playing our specified music source with the volume level of the unit set to 31 and with the factory default settings (sound mode: EXTRA BASS).
*6 Measured value acquired by playing our specified music source with the volume level of the unit set to maximum and with the factory default settings (sound mode: EXTRA BASS).
*7 Actual performance time may vary from the listed time due to the volume, songs played, surrounding temperature, and usage conditions.
System requirements for charging battery using USB
Using a commercially-available USB AC adaptor capable of feeding in 1.5 A
Compatible iPhone/iPod models
iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPod touch (6th generation) The unit is compatible with iOS 10.0 or later.
Design and specifications are subject to change without notice.
See other models: SRS-XB33 SRS-XB43 IER-M7 IER-M9 IER-Z1R
