Loading ...
Loading ...
Loading ...
44
EPILEPSY
WARNING
A few people may experience epileptic
seizures when viewing ashing lights.
Precautions
Stand Mounting Safety Precautions
Always follow instruction and precaution advice from
speaker stand manufacturer.
This speaker contains a 36 mm receptacle cup to allow mounting
on tripod stands or on a pole over subwoofers. When using
stands or poles, be sure to observe the following precautions:
• Check the stand or pole specication to be certain the device
is designed to support the weight of the speaker. Observe all
safety precautions specied by the manufacturer.
• Always verify that the stand (or subwoofer/pole) is placed on
a at, level and stable surface and be sure to fully extend the
legs of tripod type stands. Position the stand so that the legs
do not present a trip hazard.
• Use this oor stand only on a at, solid surface. Once the
support (extended leg) has been placed and adjusted,
carefully tighten the screws and use the safety pin. After
placing the speaker on the stand, check for stability: When
tilting each direction to 10 degrees (for the surface), the
speaker should not turn off. If necessary, reduce the height
of the speakers and extend the base of the stand.
• Route cables so that performers, production crew, and
audience will not trip and topple the speakers over.
• Inspect the stand (or pole and associated hardware) before
each use and do not use equipment with worn, damaged or
missing parts.
• Do not attempt to place more than one PartyBox series
speaker on a stand or pole.
• Always be cautious in windy, outdoor conditions. It may
be necessary to place additional weight (i.e. sandbags) on
the base of the stand to improve stability. Avoid attaching
banners or similar items to any part of a speaker system.
Such attachments could act as a sail and topple the system.
• Unless you are condent that you can handle the weight of
the speaker, ask another person to help you get it onto the
tripod stand or pole.
Instructions for Users on Removal, Recycling and Disposal
of Batteries
The remove the batteries from your equipment or remote control,
reverse the procedure described in the owner’s manual for
inserting batteries. For products with a built-in battery that lasts
for the lifetime of the product, removal may not be possible for
the user. In this case, recycling or recovery, it becomes necessary
to replace such a battery, this procedure must be performed by
authorized services centers. In the European Union and other
locations, it is illegal to dispose of any battery with household
trash. All batteries must be disposed of in an environmentally
sound manner. Contact your local waste-management ofcials
for information regarding the environmentally sound collection,
recycling and disposal of used batteries.
WARNING: Danger of explosion if battery is incorrectly replaced.
To reduce risk of re or burns, don’t disassemble, crush,
puncture, short external contact, expose to temperature above
60°C (140°F), or dispose of in re or water. Replace only with
specied batteries. The symbol indicating ‘separate collection’
for all batteries and accumulators shall be crossed-out wheeled
bin shown below:
In case of batteries, accumulators and button cells containing
more than 0.0005 mercury, more than 0.002% cadmium or more
than 0.004% lead, shall be marked with the chemical symbol for
the metal concerned: Hg,Cd or Pb respectively. Please Refer to
the below symbol:
WARNING: DO NOT INGEST BATTERIES, CHEMICAL BURN
HAZARD [the remote supplied with] This product contains a coin/
button cell battery. If the coin/button cell battery is swallowed, it
can cause severe international burns in just 2 hours and can lead
to death. Keep new and used batteries away from children. If you
think batteries might have been swallowed or placed inside any
part of body, seek immediate medical attention.
For All Products Except Those with Wireless
Operation
HARMAN International hereby declares that this equipment is in
compliance with EMC 2014/30/EU Directive, LVD 2014/35/EU
Directive. The declaration of conformity may be consulted in the
support section of our Web Site, accessible from www.jbl.com.
For All Products with Wireless Operation
HARMAN International hereby declares that this equipment
is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. The declaration of
conformity may be consulted in the support section of our Web
Site, accessible from www.jbl.com.
Loading ...
Loading ...
Loading ...