Loading ...
Loading ...
Loading ...
11
Set clock
1
In the standby mode, press DISPLAY/
CLOCK to activate the clock setting mode.
2 Press PROGRAM repeatedly to select 12
hour or 24 hour format.
3 Press VOL +/- to set the hour.
4 Press WRFRQÀUP
5 Press VOL +/- to set the minute.
6 Press DISPLAY/CLOCKWRFRQÀUP
Turn on
1
Press .
The unit switches to the last selected »
source.
Switch to standby
1 Press to switch the unit to standby
mode.
The clock (if set) appears on the »
display panel.
To switch the unit to Eco Power Standby
mode:
1 Press and hold for more than 2 seconds.
The backlight on the display panel »
turns off.
4 Play
Play disc
1
Press CD to select the disc source.
2 Press OPEN/CLOSE on the main unit to
open the disc compartment.
3 Insert a disc with the printed side facing
up, then close the disc tray.
4 If the disc doesn’t play, press .
To pause/resume play, press
.
To stop play, press
.
To select another track, press
/ .
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
VXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHVLQÀUH
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 2 AA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto »
install - press the PLAY button) is
displayed.
2 Press on the main unit to start
installation.
[AUTO] (auto) is displayed.»
The unit automatically stores radio »
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
When all the available radio stations »
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
1
3
2
English
EN
Loading ...
Loading ...
Loading ...