Loading ...
Loading ...
Loading ...
Before using for the first time
28
Signing on the remote control.
Press the run-on control on the
cooker hood for approx. 10 seconds
until 1 lights up.
Then press in turn:
– the control,
– then the control,
– then the lighting control.
– then press the control to sign on.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 with light
up constantly, B will flash on and off.
Press theand controls on the
remote control at the same time for
about 5 seconds until the LED on the
remote control starts flashing.
Then press in turn:
– the lighting control,
– then press the control to sign on.
The search for a wireless connection
will start. The remote control LED
flashes regularly.
After approx. 30seconds, the remote
control LED flashes on and off four
times with short intervals between the
flashes. The LED will go out after a
short while.
Wait until B on the cooker hood has
gone out and 2 and 3 are lit up
constantly. The wireless connection has
now been established.
Confirm the signing on procedure by
pressing the run-on control on
the cooker hood. All the indicator
lights will go out.
The remote control can now be used.
If confirmation is not carried out within
4 minutes, activation will not take place.
To cancel the signing on procedure
If it is not possible to sign on, the
procedure can be cancelled by
pressing the run-on control on
the cooker hood and on the remote
control.
The signing-on procedure must then
be repeated. To do this the cooker
hood and the remote control must
first be signed off.
Loading ...
Loading ...
Loading ...