Loading ...
Loading ...
Loading ...
Before using for the first time
27
Signing the remote control on/
off
If the connection has been lost between
the remote control and the cooker
hood, the remote control and the
remote control function on the cooker
hood must be signed on again. To do
this remote control on the cooker hood
and the remote control must first be
signed off.
Note that disabling the signal will also
deactivate any Con@ctivity 2.0
function and this will have to be
activated again.
Switch the cooker hood off. The
deflector plate must be retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Signing off the remote control
Press the run-on control on the
cooker hood for approx. 10 seconds
until 1 lights up.
Then press in turn:
– the control,
– then the control,
– then the lighting control.
– then the control to sign off.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will start
flashing on and off.
Confirm the signing off procedure on
the cooker hood by pressing the
run-on control. All the indicator lights
will go out.
Press theand controls on the
remote control at the same time for
about 5 seconds until the LED on the
remote control starts flashing.
Then press in turn:
– the lighting control,
– then the control to sign off.
The remote control LED flashes
regularly.
After approx. 10seconds, the remote
control LED flashes on and off twice
with a longer gap between the flashes.
The LED will go out after a short while.
The remote control is is now signed off.
Loading ...
Loading ...
Loading ...