User Manual LG OLED65C1AUB C1 65" 4K Smart OLED TV

LG OLED65C1AUB C1 65" 4K Smart OLED TV - Use Manual - Use Guide PDF.
Documents: Go to download!
  • Owner's manual - (English)



User Manual

Preparing

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

  • It is recommended to move the TV in the box or packing material that the TV originally came in.
  • Before moving or lifting the TV, disconnect the power cord and all cables.
  • When holding the TV, the screen should face away from you to avoid damage.

  • Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

  • Use at least two people to move a large TV.
  • When transporting the TV by hand, hold the TV as shown in the following illustration.

  • When transporting the TV, do not expose the TV to jolts or excessive vibration.
  • When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.
  • When handling the TV, be careful not to damage the protruding buttons.

WARNING

  • Avoid touching the screen at all times, as this may result in damage to the screen.
  • Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
  • When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

  • Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

2 Connect the power cord to a wall outlet.

WARNING

  • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
  • If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
  • Do not use any unapproved items to ensure the safety and lifespan of the product.
  • Any damages or injuries by using unapproved items are not covered by the warranty.
  • Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
  • Do not fasten the screws with excessive force otherwise they may strip and become loose.

Securing TV to the Wall

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

  • If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

  • Use a platform or cabinet that is strong and large enough to support the TV securely.
  • Brackets, bolts and ropes are optional. You can obtain additional accessories from your local deale

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

WARNING

  • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
  • For more information of screws and wall mount bracket, refer to the Separate Purchase.
  • If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
  • When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
  • Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
  • Please use the accessory cable holder when hanging on the wall. (Only OLED48/55/65/77/83C1*)

Wall Mounting Bracket

(Depending upon model)

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

  • Make sure not to bend the copper wire of the RF cable.

  • Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
  • Use a signal splitter to use 2 TVs or more.
  • DTV Audio Supported Codec: MPEG, Dolby Digital
  • This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Using button

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

Note

  • Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
  • The available menus and options may differ from the input source or product model that you are using.
  • New features may be added to this TV in the future.
  • The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord.

Inserting the battery

When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace the batteries.

To install batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

  1. Put batteries into the Magic Remote and turn the TV on.
  2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
  • If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the (Back) and (Home) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

  • Press and hold the (Home) and (Q. Settings) buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

WARNING

  • It is recommended that an Access Point (AP) be located more than 0.2 m (0.65 ft) away from the TV. If the AP is installed closer than 0.2 m (0.65 ft), the Magic remote control may not perform as expected due to frequency interference.

Connecting Smart Devices using NFC Tagging

Using the NFC Feature

NFC is technology that uses Near Field Communication, allowing you to conveniently send and receive information without separate settings. By bringing a smart device near the NFC-enabled remote control, you can install the LG ThinQ app and connect the device to the TV.

  1. Turn on NFC in the smart device’s settings. To use NFC with Android devices, set the NFC option to enable ‘read/write tags’ in the smart device’s settings. The NFC settings may vary depending on the device.
  2. Bring the smart device near the (NFC) on the remote control. The required distance for NFC tagging is about 1 cm (0.39inches).
  3. Follow the instructions to install the LG ThinQ app on your smart device.
  4. Retagging the smart device to the remote control allows you to conveniently access various features on the connected TV through the LG ThinQ app.

Using Remote Control

Using Magic Remote Control

(Depending upon model)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

Connections

You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device

HDMI

  • When connecting the HDMI cable, the product and external devices should be turned off and unplugged.

  • Supported HDMI Audio format (Depending upon model):

True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),

PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)

Note

If the device connected to Input Port also supports HDMI Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Color] setting to off.

  • → [General] → [Devices] → [HDMI Settings] → [HDMI Deep Color]

(OLED48/55/65/77A1*)

  • On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),
  • Off: Support 4K @ 50/60 Hz (4:2:0)

(OLED55/65/77B1*)

  • On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),<3,4 port only> 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)
  • Off: Support 4K @ 50/60 Hz (4:2:0)

(OLED48/55/65/77/83C1*)

  • On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)
  • Off: Support 4K @ 50/60 Hz (4:2:0)
  • Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
  • Recommended HDMI cable types (3 m (9.84 ft) or less)
  • Ultra High Speed HDMI®/™ cable

Note

  • For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
  • Use an extension cable that supports if the USB cable or USB flash drive does not fit into your TV’s USB port.

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

Note

  • If you record a TV channel on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.
  • The external device connections shown may differ slightly from illustrations in a manual.
  • Connect external devices to the TV regardless about the order of the TV port.
  • If you connect a gaming device to the TV, use the cable supplied with the gaming device.
  • Refer to the external equipment’s manual for operating instructions.
  • In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
  • Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV.
  • When connecting via a wired LAN, it is recommended to use a CAT 7 cable.
  • The TV may be capable of operating without a set-top-box from a multichannel video programming distributor (MVPD).

Remote RS-232C setup

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual, (Depending upon model).

WARNING

  • Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
  • When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Troubleshooting

Cannot control the TV with the remote control.

  • Check if anything such as tape has been placed over the receiver.
  • Check if there is any obstacle between the product and the remote control.
  • Replace the batteries with new fresh ones.

No image display and no sound is produced.

  • Check if the product is turned on.
  • Check if the power cord is connected to a wall outlet.
  • Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.

  • Check the power control settings. The power supply may be interrupted.
  • Check if the auto-off function is activated in the settings menu.
  • If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Abnormal Display

  • If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
  • This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

Generated Sound

  • Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
  • Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).

  • For information of the power supply and power consumption, refer to the label attached to the product.
    • The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.

*On some models, the label is inside the external device connection terminal cover.

*Depending upon the model or country, the typical power consumption may not be on label.



See other models: OLED77C1AUB OLED83C1AUA 50NANO85APA 55NANO85APA 65NANO85APA

LG Electronics OLED65C1AUB | File type: PDF | Filename: LG OLED65C1AUB C1 65 inch 4K Smart OLED TV.pdf | Size: 6.12 MB | Language: English

Download User Manual

Product Infomation and Reviews - OLED65C1AUB photo

OLED65C1AUB Photo

LG Electronics in United States

(800) 243-0000 Consumer (7am-midnight CST) (888) 865-3026 Commercial (8am-6pm CST)

LG Electronics OLED65C1AUB Questions and Answers

Find answers or Ask a question.
  • Total questions: 3
  • Questions unAnswered : 3

#1 The c1's back is black in pictures but fully white in unboxing videos. how can i purchase the black version? rear panel lottery...?
The C1 series sold in the US has a black back cover. However, some other markets will have white so it's possible that any unboxing videos you've seen were done in other markets, where a white version will be sold.

#2 What’s the difference between ‘wall mount’ and ‘can be wall mounted?’ Can all these TV’s be tabletops?
'Can be wall mounted' should mean that the TV comes with an attachable stand but you could wall mount it instead if you get yourself a wall mount, while 'wall mount' suggests that the TV does not come with any stand. This TV does come with the wide solid stand shown.