Loading ...
Loading ...
Loading ...
7
Slicing Disc, Shredder Disc & French Fry
Disc Assembly
1. Position the driver on to the motor base.
2. Position the processing bowl over the driver and
turn clockwise to lock the bowl onto the motor
base.
3. Install the desired disc into the disc holder.
4. Place the disc holder onto the driver.
5. Place the lid on bowl
6. Turn the lid clockwise until it locks onto the bowl.
7. Put food into the feeding chute.
8. Use the pusher to push the food down for
processing.
Notes:
Choose the desired disc according to the food to
be processed and the desired shape of food.
Push softly when feeding food into the food
processor
Food can be cut into smaller pieces to allow it to
be fed into the feeding tube.
When cutting soft food, it should be fed into the unit slowly for good results.
Choose a lower speed to avoid the food turning soupy. If large quantity food
needs to be cut, please cut it for several batches, with a maximum of 1400ml
for each batch.
A break of 5 minutes should be taken after each minute of operation to
prevent overheating.
HOW TO DISASSEMBLE
1. Remove the pusher.
2. Turn the lid anti-clockwise, before lifting it and removing.
3. Lift the blade holder from the driver.
4. Lift the blade and remove it from the blade holder.
5. Turn the bowl anti clockwise to unlock it from the motor base.
6. Lift the bowl and remove from the base.
Loading ...
Loading ...